BOM
Printed parts
1 1 Bottom part
2 1 Electronics box
Other parts
1 4 M3 10 mm allen screws
2 2 M4 20 mm allen screws
3 1 Electronics board
Tools
1 1 2.0 mm hexagonal key
2 1 2.5 mm hexagonal key
Directions
Electronics box assembly
1
Take the printed box and the electronics controller board.
2
Insert the board in the box, as in the picture. Make sure the usb and power jack are placed on the open side.
3
Take the 4 M3 screws and attach the box to the bottom part.
Bottom part assembly
5
Attach the previously mounted frame to the bottom part. Use the 2 M4 mm screws in the front. Make sure that the box open side is on the left.
6
BOM (Bill Of Materials)
Printed parts
1 1 Bottom part
2 1 Electronics box
Other parts
1 4 M3 10 mm allen screws
2 2 M4 20 mm allen screws
3 1 Electronics board
Tools
1 1 2.0 mm hexagonal key
2 1 2.5 mm hexagonal key
Directions
Electronics box assembly
1
Take the printed box and the electronics controller board.
2
Insert the board in the box, as in the picture. Make sure the usb and power jack are placed on the open side.
3
Take the 4 M3 screws and attach the box to the bottom part.
Bottom part assembly
5
Attach the previously mounted frame to the bottom part. Use the 2 M4 mm screws in the front. Make sure that the box open side is on the left.
6