BOM
Printed parts
Other material
Directions
Prepare the coupling
Cut the PVC tube in half. Glue 20mm PVC tube to the printed part. Insert the tube in the part.
Insert the shaft motor in the coupling.
Attach the motor to the Z-motor mount
Insert the bearings in the printed parts.
Insert the spring in the PVC + coupling. Take 2 M3 nuts and 2 16 mm Allen screws then...
insert the coupling motor in the bearing and secure it by attaching the screws.
Insert the M3 nut in place and attach the screw. Do not tighten much, this will be adjusted later.
Repeat for the other motor.
Z-motor assembly
With 2 20mm Allen screws attach the Z-mount to the frame. Repeat for the other Z-mount.
BOM (Bill Of Materials)
Printed parts
Other material
Directions
Prepare the coupling
Cut the PVC tube in half. Glue 20mm PVC tube to the printed part. Insert the tube in the part.
Insert the shaft motor in the coupling.
Attach the motor to the Z-motor mount
Insert the bearings in the printed parts.
Insert the spring in the PVC + coupling. Take 2 M3 nuts and 2 16 mm Allen screws then...
insert the coupling motor in the bearing and secure it by attaching the screws.
Insert the M3 nut in place and attach the screw. Do not tighten much, this will be adjusted later.
Repeat for the other motor.
Z-motor assembly
With 2 20mm Allen screws attach the Z-mount to the frame. Repeat for the other Z-mount.