BOM (Bill Of Materials)
Printed parts
Other material
Tools
Directions
Attach the endstop
Insert 2 M2.5 nuts in place. Attach the mechanical endstop with 2 12 mm M2.5 flathead screws.
Attach the motor
Attach the motor with the 4 10 mm M3 screws. Be sure the motor wires are facing down.
Attach the part to the frame
Insert 2 M4 nuts in place.
Using the 2 M4 20 mm screws. Attach the part to the frame.
Take the M6 rod, the 6 M6 nuts, the 6 M6 lock washers, and the 626zz bearing.
Insert as follows:
nut-washer-frame-washer-nut-nut-washer-y-motor part with bearing in the middle-washer-nut-nut-washer-frame-washer-nut.
BOM (Bill Of Materials)
Printed parts
Other material
Tools
Directions
Attach the endstop
Insert 2 M2.5 nuts in place. Attach the mechanical endstop with 2 12 mm M2.5 flathead screws.
Attach the motor
Attach the motor with the 4 10 mm M3 screws. Be sure the motor wires are facing down.
Attach the part to the frame
Insert 2 M4 nuts in place.
Using the 2 M4 20 mm screws. Attach the part to the frame.
Take the M6 rod, the 6 M6 nuts, the 6 M6 lock washers, and the 626zz bearing.
Insert as follows:
nut-washer-frame-washer-nut-nut-washer-y-motor part with bearing in the middle-washer-nut-nut-washer-frame-washer-nut.